The Breitling Watch Source Forums

Three links were damaged when four links were taken out of my Breitling Titanium bracelet. One screw has been broken off in each of the links which I understand is not unusual.

I do have two new links and one original spare link but would like to repair two of the damaged links. I have new screws from Breitling which are coated with, possibly, Loctite thread lock. Does anyone know the specification for these screws i.e. diameter and pitch? With the thread lock they're coming in at around 0.95mm and the existing screws at around 0.9 to 0.92mm. I'd like to get a thread tap to clean up the old threads.

I'm new to Breitling but have found their UK service centre to be very helpful. Brand new complete links are still available at £30 inclusive via their AD network but I just feel - bit nerdy I know - that it's such a waste to lose two links to broken screws that will be relatively easy to mill out?

Thanks for your help,

Martin

_________________
Martin

Chrono Avenger M1 Titanium
Colt II Chrono