The Breitling Watch Source Forums

Dear Forum Mates,

please chime in those who know the answer on any of the two following technical questions:

1. what is the micro adjustment range of the steel bracelet clasp of the newest 46 mm Superocean? (Just an info for comparison: the older folding clasp for 22/20 mm rubber straps has just 10 mm adjustment range.) The length of a normal link of the mentioned bracelet is also highly welcome! (Maybe around 10 mm, seems a tad longer than that of the Professional II.)

2. If anyone has tried to mount the 22 mm steel Navi bracelet of the previous Navitimers (ref. 13322, bracelet end link number 440A or 423A or D) on the newer Navitimer 41 (produced around 2018-19, ref. 13324 - 7750-based movement -, bracelet end link number 451A) the question is if those endlinks (so 440A, 423A, 423D) do have a perfect fit to the ref. 13324 Navi 41?

Thank you in advance for any constructive input, preferably on personal experience - professionals chiming in is also welcome! I'll let you know when I'll have the answer for both questions, until then they are open.

Thanks again, regards:
Robert

_________________
Current: Breitling Chronomat 41, Steelfish Chrono BEB dials, Grand Premiers both dials, Aerospace Avantage, IWC Aquatimer 3719 3767, Fliegerchrono 3705, Sinn 103 St plexy

1)I have the 42mm Superocean with the new bracelet, 22/18. The full clasp range is about 14mm from fully open to fully closed (12 ratchet clicks total, so about 1.16 mm resolution). The link itself is about 11mm.

The 46mm Superocean may have similiar ranges (?). Hope this helps.
Terry



Sent from my iPhone using Tapatalk

_________________
Chrono Jetstream
Montbrilliant 1903
Aerospace E79362