| The Breitling Watch Source Forums https://breitlingsource.com/phpBB2/ |
|
| Rose gold screws? https://breitlingsource.com/phpBB2/viewtopic.php?f=1&t=4461 |
Page 1 of 2 |
| Author: | hnb [ Tue Aug 19, 2008 9:56 am ] |
| Post subject: | Rose gold screws? |
I got this picture in my head that changing the bezel-screws on my SA to golden ones will be a subtle and goodlooking "pimping" of the watch... (feedback on that thought is welcome) So, how do you get those screws, rose or yellow gold....? |
|
| Author: | subzero [ Tue Aug 19, 2008 10:52 am ] |
| Post subject: | |
definitive yellow gold rose is...
you did give me a thing to think about tho... get them ad a servicepoint i think |
|
| Author: | aleister [ Tue Aug 19, 2008 1:02 pm ] |
| Post subject: | |
I'm not 100%, think it would look a bit weird... But if you do it, I think rose gold would go better with the steel. |
|
| Author: | In2Deep [ Tue Aug 19, 2008 1:07 pm ] |
| Post subject: | |
You might be able to get away with it if you used a gold/yellow croc type of setup. |
|
| Author: | hnb [ Tue Aug 19, 2008 1:08 pm ] |
| Post subject: | |
Exactly my thought too... and since they will probably not be too expensive it would be fun to try it. C´mon all you AD´s here - do you have them/can you get them? |
|
| Author: | rod404 [ Tue Aug 19, 2008 1:36 pm ] |
| Post subject: | |
u got me thinking- good idea. But- will all breitling bezel screws be the same length, width? |
|
| Author: | subzero [ Tue Aug 19, 2008 1:42 pm ] |
| Post subject: | |
hnb wrote: ...
C´mon all you AD´s here - do you have them/can you get them? i'm wonderig what the screws costs |
|
| Author: | dgleeds [ Fri Aug 22, 2008 10:38 am ] |
| Post subject: | |
I am not a fan of diamond encrusted anything, and don't much like the look of gold on watches rose or yellow. I prefer steel or titanium, or even blacksteel for my watches, but if you have to pimp go with the rose. |
|
| Author: | Breitling Bloke [ Fri Aug 22, 2008 10:58 am ] |
| Post subject: | |
subzero wrote: hnb wrote: ... C´mon all you AD´s here - do you have them/can you get them? i'm wonderig what the screws costs I had a new screw the last time my Aerospace was serviced and it was only £36 - but that was not a gold screw, only Ti.
Maybe the gold would only be about £50 so what's that then? £600 - peanuts. Oh - hang on - that was rip off Britain. Probably be about $150/€100 Yeah - might look quite nice - go for GOLD. What's the setup you have on that bad boy anyway? Case - bracelet - dial? Maybe someone can mock one up if you tell us what you have to start with. Maybe we can get some screw swaps going! |
|
| Author: | In2Deep [ Fri Aug 22, 2008 11:03 am ] |
| Post subject: | |
Well I doubt it'll be that little... Examples: Steel Tang buckle: $25 Rose Gold version: $925 Steel Deployant: $240 Rose Gold Version: $3250 Pilot bracelet in steel: $1300 in 22mm rose gold: $18000 Professional bracelet: $500 yellow gold: $15900 white gold: $19300 my point is when you mention gold around Breitling, be prepared to bend over and take it like a man |
|
| Author: | Driver8 [ Fri Aug 22, 2008 11:14 am ] |
| Post subject: | |
Breitling Bloke wrote: I had a new screw the last time my Aerospace was serviced and it was only £36
- but that was not a gold screw, only Ti.I'm sorry, for a second there I thought I read that it costs £36............. FOR ONE SCREW!!!!!!!!!!!! That is frankly daylight robbery! Especially since I was quoted by an AD only £120 for a Bentley Motors T bezel. The cynic in me might suggest that people may need screws more often than bezels, so it's probably quite a nice money-spinner. |
|
| Author: | In2Deep [ Fri Aug 22, 2008 11:26 am ] |
| Post subject: | |
Yeah, brings a whole new meaning to the word "screw"
|
|
| Author: | donkamio [ Fri Aug 22, 2008 12:08 pm ] |
| Post subject: | |
In2Deep wrote: Yeah, brings a whole new meaning to the word "screw"
![]()
|
|
| Author: | Driver8 [ Fri Aug 22, 2008 12:21 pm ] |
| Post subject: | |
In2Deep wrote: Yeah, brings a whole new meaning to the word "screw"
![]() |
|
| Author: | hnb [ Fri Aug 22, 2008 8:55 pm ] |
| Post subject: | |
Yeah, I don´t want to get screwed here.... jeeez, if those prices are correct it is a robbery! I just ordered a black Ocean Racer and a dark brown leatherstrap, will keep me occupied and pimpin´ for a while. |
|
| Page 1 of 2 | All times are UTC - 8 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|