| The Breitling Watch Source Forums https://breitlingsource.com/phpBB2/ |
|
| Cape Cod cleaning process tips https://breitlingsource.com/phpBB2/viewtopic.php?f=1&t=36083 |
Page 1 of 1 |
| Author: | Darston [ Mon Jan 02, 2012 7:58 am ] |
| Post subject: | Cape Cod cleaning process tips |
Hi everyone. I own a Navi World on steel and wanted to know the "correct" process and/or tips for cleaning. Your recommendations are appreciated. |
|
| Author: | sharkman [ Mon Jan 02, 2012 8:09 am ] |
| Post subject: | Re: Cape Cod cleaning process tips |
Cape Cod is for polishing out scratches, not cleaning. Assuming it's scratches you are dealing with, if you sre working on the bezel area, tape off the crystal so you don't slip and mess up the A/R. Otherwise, it's simply elbow grease and patience. I wear disposible latex gloves too - those chemicals are pretty nasty. |
|
| Author: | Darston [ Mon Jan 02, 2012 8:16 am ] |
| Post subject: | Re: Cape Cod cleaning process tips |
sharkman wrote: Cape Cod is for polishing out scratches, not cleaning. Assuming it's scratches you are dealing with, if you sre working on the bezel area, tape off the crystal so you don't slip and mess up the A/R. Otherwise, it's simply elbow grease and patience. I wear disposible latex gloves too - those chemicals are pretty nasty. Sorry...you're right. I'm looking at polishing out the scratches. Thanks for your feedback. |
|
| Author: | Roffensian [ Mon Jan 02, 2012 9:00 am ] |
| Post subject: | Re: Cape Cod cleaning process tips |
There are a lot of threads on this as well so looking through some of them will give you a pretty good idea of what people do. |
|
| Page 1 of 1 | All times are UTC - 8 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|