The Breitling Watch Source Forums https://breitlingsource.com/phpBB2/ |
|
Breitling bentley 6.75 need help https://breitlingsource.com/phpBB2/viewtopic.php?f=1&t=35392 |
Page 1 of 2 |
Author: | vegasbreitling [ Mon Dec 05, 2011 11:55 pm ] |
Post subject: | Breitling bentley 6.75 need help |
I am a new member I recentley got a breitling bentley 6.75 love the watch this is the most expensive time piece I have my uncle gave it to me as a gift my questions is how old is this watch ? what is it worth? I didnt get box and papers with it and the only problem I have is when I take it off it stops running within 2 hours he told me I need a watch winder how would I know when I need service? I didnt see many memeber's having this watch couldnt figure out why in the forums any help or answers are helpful thanks. |
Author: | Driver8 [ Tue Dec 06, 2011 1:45 am ] |
Post subject: | Re: Breitling bentley 6.75 need help |
Lots of questions in there. Firstly, and before we get into any of your questions, I'd suggest you post up a couple of pictures of it so we can verify that it's genuine. Just from what you've said I have a sneaking suspicion it may well be a fake...... but if you post some pics we can tell you instantly. If it's not genuine it'd only be a waste of your time for us to go into answering your other queries. |
Author: | Sharkmouth [ Tue Dec 06, 2011 1:49 am ] |
Post subject: | Re: Breitling bentley 6.75 need help |
![]() D8 voiced my concerns about the watch while I was typing my reply. Strange behaviour for a relatively new Breitling. Anyway, to answer your questions... Age: Not sure if it applies to the Bentley range but on other Breitlings, there is a tiny code etched onto the case between the lugs at the bottom of the watch. You may have to remove the strap to see it. This shows the week and year of manufacture. In this example, week 14 of 2009. (B5 indicates the dial colour is black.) Edit - sorry for the typo, should read 2008 of course. ![]() Value: Check eBay and Chrono24 to get an idea of value. Stopping: I think the power reserve should be around 40 hours after fully winding so something is wrong. Putting the watch on a winder might mask the problem but not cure it. It needs to go to Breitling to be fixed. Service: Recommended every 3-5 years so depending upon date of manufacture, it could be due. As D8 says, it would be good to see a pic of the watch. |
Author: | nr123 [ Tue Dec 06, 2011 4:05 am ] |
Post subject: | Re: Breitling bentley 6.75 need help |
Sharkmouth wrote: In this example, week 14 of 2009 Just checking - you mean 2008? |
Author: | F14D_Tomcat [ Tue Dec 06, 2011 5:07 am ] |
Post subject: | Re: Breitling bentley 6.75 need help |
nr123 wrote: Sharkmouth wrote: In this example, week 14 of 2009 Just checking - you mean 2008? Yes he does. |
Author: | vegasbreitling [ Tue Dec 06, 2011 10:12 pm ] |
Post subject: | Re: Breitling bentley 6.75 need help |
Hey guys the pics I have r too big past 256 k if u guys have a email I'll send the pics to you but I am sure it's real cause I took it to tourneu to polish and they checked the movement for me so it's real |
Author: | Driver8 [ Wed Dec 07, 2011 4:42 am ] |
Post subject: | Re: Breitling bentley 6.75 need help |
vegasbreitling wrote: Hey guys the pics I have r too big past 256 k if u guys have a email I'll send the pics to you but I am sure it's real cause I took it to tourneu to polish and they checked the movement for me so it's real This should help - viewtopic.php?f=5&t=453 Assuming it is real, then Sharkman's given the info you'll need to answer your questions. |
Author: | vegasbreitling [ Wed Dec 07, 2011 12:55 pm ] |
Post subject: | Re: Breitling bentley 6.75 need help |
Thanks guys I emailed the pic let me know if there if there is any problem thanks |
Author: | Sharkmouth [ Wed Dec 07, 2011 2:06 pm ] |
Post subject: | Re: Breitling bentley 6.75 need help |
Here's the pics and no doubt whatsoever in my mind that it's genuine. I've done a crop showing the date window to save you zooming in ![]() ![]() ![]() ![]() ![]() So, anyone got any ideas why it might be stopping? |
Author: | vegasbreitling [ Wed Dec 07, 2011 4:09 pm ] |
Post subject: | Re: Breitling bentley 6.75 need help |
Hey sharkmouth thanks for putting the pics up ![]() |
Author: | Roffensian [ Wed Dec 07, 2011 5:31 pm ] |
Post subject: | Re: Breitling bentley 6.75 need help |
Well the diamonds certainly reduce the number of potential buyers. No idea what it does to the value, you would need to get the diamonds assessed. The first thing to check if it keeps stopping is the power reserve. Give the watch 40 winds of the crown and then put it down and leave it until it stops. Then see how long that is. It may be stopping after a couple of hours simply because it needs winding so let's eliminate that first. |
Author: | FEAR [ Wed Dec 07, 2011 7:07 pm ] |
Post subject: | Re: Breitling bentley 6.75 need help |
my watchmaker can do it with or without that bezel, but id lose it if it were me, and i own a diamond bezel watch. its just kinda chooch like that if it makes sense. |
Author: | Time Bandit [ Wed Dec 07, 2011 7:20 pm ] |
Post subject: | Re: Breitling bentley 6.75 need help |
I would think people would be more inclined to think it's fake with that bezel but it wouldn't stop me from wearing it if I liked it. But you definitely won't ever be seeing one on my 6.75. I actually like a little non-diamond bling so the stock bezel works quite well for me. The diamonds would probably easily take care of getting a new bezel put on, and some cash towards the repair if it turns out you have an issue. Heck of a gift! |
Author: | vegasbreitling [ Wed Dec 07, 2011 11:07 pm ] |
Post subject: | Re: Breitling bentley 6.75 need help |
Well I timed the watch after I wind it 45 times it stopped in 50 min when I put it down what u guys think I talk to a AD on the phone they said it sounds like a over haul |
Author: | Driver8 [ Thu Dec 08, 2011 1:47 am ] |
Post subject: | Re: Breitling bentley 6.75 need help |
Congrats on the watch - as others have said it is indeed genuine. ![]() I can't imagine the diamonds will lower the value, but as Roff said they may well put a lot of buyers off purchasing it. Anything that's non-OEM and a bit bling like that can be a bit off-putting to some. That said, the watch will still have a pretty reasonable value, and if the diamonds are good quality, they will have a monetary value on their own. There's something definitely wrong with the mechanics though if it is only running for about an hour after a full wind. It's definitely a trip to Breitling. Incidentally I'm pretty sure Breitling will service it even with the aftermarket bezel, despite what some AD's may say. Certainly in the UK, Breitling don't have a problem with non-OEM bezels on watches sent in for service as swapping them out isn't considered an "invasive" procedure. i.e. by changing the bezel, the factory seal of the case isn't compromised. Give BUSA a call direct and just ask the question. They will probably be able to give you a ball-park quote for the work as well. |
Page 1 of 2 | All times are UTC - 8 hours |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |