The Breitling Watch Source Forums
https://breitlingsource.com/phpBB2/

Screwdriver size for SuperAvenger?
https://breitlingsource.com/phpBB2/viewtopic.php?f=12&t=16019
Page 1 of 1

Author:  The Toecutter [ Tue Jan 19, 2010 8:53 pm ]
Post subject:  Screwdriver size for SuperAvenger?

I've done a search and read that it's 1.8mm. The one I have, the blade of the screwdriver is too thick to fit in the slot and turn the screw.

Is it really 1.8mm?

Author:  Driver8 [ Wed Jan 20, 2010 2:19 am ]
Post subject:  Re: Screwdriver size for SuperAvenger?

Yes it is 1.8mm if you use a proper watch watchmaking screwdriver such as a Bergeon. Chances are that if it's just a small screwdriver (or a cheap watchmaking screwdriver) as opposed to a proper watchmaking screwdriver by a decent make, then the blade may well be less fine and hence not fit.

What make is it you are using?

Author:  The Toecutter [ Wed Jan 20, 2010 5:10 am ]
Post subject:  Re: Screwdriver size for SuperAvenger?

It's a cheap one. I'd buy a Bergeon 1.8mm in a second, but I can't find one.

Any alternatives out there?

Author:  Roffensian [ Wed Jan 20, 2010 5:51 am ]
Post subject:  Re: Screwdriver size for SuperAvenger?

The Toecutter wrote:
It's a cheap one. I'd buy a Bergeon 1.8mm in a second, but I can't find one.

Any alternatives out there?


Bergeon 160 (1.6mm).

Author:  Sparwood [ Wed Jan 20, 2010 6:58 am ]
Post subject:  Re: Screwdriver size for SuperAvenger?

I just bought the 1.6mm from chronoworld.com, they sell them individually $11.00 each plus $6 shipping, they also sell the 6767F springbar tool for $17. Didn't realize they ship from Japan until I got the confirmation email though......

Author:  Zirotti [ Wed Jan 20, 2010 7:50 am ]
Post subject:  Re: Screwdriver size for SuperAvenger?

Man, see if you can cancel the order. You're best bet is Otto Frei, and I believe they ship from Canada and their are cheaper. The 160 is $8 there.

http://www.ofrei.com/page1361.html

Author:  Roffensian [ Wed Jan 20, 2010 8:21 am ]
Post subject:  Re: Screwdriver size for SuperAvenger?

Zirotti wrote:
Man, see if you can cancel the order. You're best bet is Otto Frei, and I believe they ship from Canada and their are cheaper. The 160 is $8 there.

http://www.ofrei.com/page1361.html


They are in California, not Canada.

Author:  Sparwood [ Wed Jan 20, 2010 12:42 pm ]
Post subject:  Re: Screwdriver size for SuperAvenger?

Zirotti wrote:
Man, see if you can cancel the order. You're best bet is Otto Frei, and I believe they ship from Canada and their are cheaper. The 160 is $8 there.

http://www.ofrei.com/page1361.html



Well my wife is in Tokyo for a week and I ordered the screwdriver while I balanced my 6 month old on my knee and played cars with my 2 year old with the other hand so 3 bucks is the least of my worries today :lol:

Author:  Zirotti [ Wed Jan 20, 2010 1:35 pm ]
Post subject:  Re: Screwdriver size for SuperAvenger?

I was just saying in regards to shipping and wait time...

Author:  Sparwood [ Wed Jan 20, 2010 7:43 pm ]
Post subject:  Re: Screwdriver size for SuperAvenger?

Zirotti wrote:
I was just saying in regards to shipping and wait time...



No worries, actually shipping was not bad, they said 5-8 days, I guess we'll see when it shows up. I will check out the website you suggested as well for interest.

On a side note I noticed you're from Grand Rapids, my brother used to play hockey there for the Griffins a couple of years ago.

Page 1 of 1 All times are UTC - 8 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/