| The Breitling Watch Source Forums https://breitlingsource.com/phpBB2/ |
|
| Crown for 1968 Top Time 2000? https://breitlingsource.com/phpBB2/viewtopic.php?f=11&t=66763 |
Page 1 of 1 |
| Author: | MA10 [ Thu Feb 13, 2020 2:57 pm ] |
| Post subject: | Crown for 1968 Top Time 2000? |
Please can someone help me. I have inherited a 1968 Gold Plated Top Time 2000 from my late father. It needs quite a bit of work. Service, crystal, new pusher caps and a crown. What specific crown does this need? (Part number, tap size etc). I see a few on Ebay and would like to purchase one but I am unsure it will fit. I also need split stem. Any help is much appreciated. I have a local watchmaker who can do all work but seems unwilling to find out the parts. Thanks! Marc |
|
| Author: | buddman [ Thu Feb 13, 2020 4:03 pm ] |
| Post subject: | Re: Crown for 1968 Top Time 2000? |
The Breitling crowns are 99% tap 12. Diameter of a crown for the top time is 5.6-5.8mm IIRC. Crown you would find some place like eBay although I've looked quickly and don't see any there currently. Split stem your watchmaker should just be able to buy. It’s a bestfit 360/123 or Venus part 404. I can understand a watchmaker not wanting to spend time finding actual old parts, but stems, crystals, and pushers will be bought on line, Crystal is standard, sometimes an armoured crystal is needed to hold the dial in place, sometimes not. Again, your watchmaker should assess and just order. Pusher caps are problematic and you wont find the correct cap dimensions. Im not sure of the replacement size but search this forum and you will find it someplace. |
|
| Author: | MA10 [ Thu Feb 13, 2020 4:13 pm ] |
| Post subject: | Re: Crown for 1968 Top Time 2000? |
Thank You for your fast response! I'll try to find out as much as I can to aid watchmaker. I have a new crystal and pushers ordered already. I may get case refinished also. It's probably not economically worth it but is of more sentimental value. Thanks. |
|
| Page 1 of 1 | All times are UTC - 8 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|